Plate   Type

Alliance   far red film

Spectral   Sensitivity

HeNe   laser and red laser diode (630-670nm)

Description

Emulsion   coated on a 0.10 mm antistatic polyester base

Practical Photographic Properities with different engine

Engine

Accuset

Avantra

Int. Setting

170

230

Practical Density

D.4.00-4.20

D.4.10-4.30

5%

5%

5%

50%

57%

53%

95%

98%

96%

Developer

Agfa   developers

Processing   time

20-40   sec

Processing   temperature

35℃ or 95℉

Developer Replenishment

(eg, ACD/ASD)

15%   exposure

50ml/m²

50%   exposure

150ml/m²

85%   exposure

250ml/m²

Anti-OX   replenishment

1000   ml/24h=0.264 US gallons/24h

Fixer

Agfa fixer

Fixing   temperature

32℃ or 90℉

Fixer   replenishment(Without Fixer electrolysis)

15%   exposure

500   ml/m²

50%   exposure

300ml/m²

85%   exposure

100ml/m²

Fixer   replenishment with Fixer electrolysis

125   ml/m²

Practical   set-up density

D   4.00-D.4.20 (dot gain depending on optical quality of imagesetter)

Chemical   Compatibility

Processable   in all rapid access chemistries and in main hard dot chemistries such as   RA2000, Fuji HQ QRD-1 AND QRD-1P

Dimensional   Stability

Humidity   coef: 0.10mm base, Crh 0.016mm/m/%RH

Temp.   coef: 0.10mm base, Cot 0.018mm/m/1℃

Safe   light

Dark   Green, recommended: Encapsulite T20/ND.75 or equivalent

Storage

The films are preferably   stored in a cool dry place temperature below 20℃ and a relative humidity between 30% and 60%